ValveMaster Valve Spring Tools
"Least Amount of Effort for Maximum Results"


Feedback


ValveMaster Single Groove  

Hi, I bought the 2AZ-FE tool from you and absolutely love it. I
am wondering if you can sell me the 5SFE tool without the handle?
I bought the VMTMG and it works great Thanks very much

I just received the VMT68. OMG...I can't believe how easy it was to use.
I practiced on an old head I had. I had the springs off and back on in no time!!
John Sabol-Virgina Beach VA
The VMTMG tool is amazing and I am so glad I bought it. BC, Canada

Hi guys,
Just wanted to say I purchased your valvemaster tool from ebay and it's magical!! Has saved me hours and
hours playing around with other valve spring tools so thanks again for making such an awesome product!
Cheers,
Andrew - Australia

My buddy purchased your tool and I got to use it while helping him on his daughters 1999 Toyota Solara.
That tool is amazing. It worked even better than I expected. I would recommend this tool highly..5 stars!!
I wish he would have bought the tool to remove the valve seal. Those buggers are tough!
David DeGan
Chico, TX

Thanks again for the quick turnaround of my toyotool order.
The ValveMaster works even better than expected -- it makes installing new valve spring seals a trivial job.
Why we have been using the old spring clamps all these years is beyond me.
When you have a moment please drop me a note -- I'd like to pick up the other insert to complete the set.
Cheers - Bradley Naperville IL

Hey guys.
I really appreciate the speedy shipping. I ordered the tool Saturday and it arrived Tuesday.
I've had a chance to try it out and it is an incredible time saver.
It is intuitive to use, well made, and very smooth operating.
I look forward to many years of service from it.
Thanks again!
Jeff Fichlie
Villa Hills KY

I received the Toyota 20V tool and the sleeve today.
Thanks for the quick shipping!
Stefan van Elst
Netherlands

I just want to mention that the person who came up with the ValveMaster tool is a genius
and my hero.I work on mostly Toyota 4 cyl. engines and use to dread taking the valves out.
Now I look forward to it. The tool is so easy to use and a time saver.
Thanks for a great product.
Paul Martin
East Troy WI


Having purchased a Valvemaster a while ago for use on a Ford Duratec HE14 engine, we finally used the tool today.
My friend is a race mechanic, and he couldn't believe how good the Valvemaster is.
In fact he hasn't stopped going on about it since!!It is one of the best and
simplest to use time saving tools ever, and very well made.
Kind regards,
Paul Gilbert.Worthing United Kingdom.

A great tool, very impressed. I've passed on the info to a pal who sells workshop tools, I hope you get some more sales.
Dave T

You did a great job with the ValveMaster tool. After I figured out how much force was needed, it was a piece of cake to use.
I tried to do onevalve with an old motorcycle valve spring tool I have. There aren't enough
cuss words to describe what that would have been like on 24 valves. Your
tool paid for itself in ease of use on standard valve springs.
Lisa Clark
Gilroy CA

Just wanted to let you know, the tool worked great!! I was able to change the
valve seals on both Accords in no time. It's great to have a tool that worked as described.
T. Collins
Fayetteville, GA

This tool is great. My Toyota has been blowing oil for a long time because of the difficulty of removing and replacing the valve seals.
I just completed the job with your tool and couldn't be more satisfied! Whoever designed the tool
needs to get a smart guy of the year award!
David Myers
Martinsburg WV


"Your new tool worked perfectly. It makes other tools obsolete. It takes only a second to remove the keepers and
to reinstall the keepers. The tool pays for itself in reduced labor the first time you use it. I recommend it to everyone.
Maurice Johnson,
Denver, Colorado


Your valve tool is great, I have been using it to replace the valve stem seals, with the head on the block, on Toyota
Supra 2JZGE motors(24 valves inline 6). I save about 1/3 the time using this tool over my Snap-On tool that I had to modify
greatly. My modified Snap-on tool works marginally compared to your tool. Thank you for offering this tool.
Mohd A.

I really like the tool. I have recommended the tool several times on the MR2 Owner's Club forum page.
Mace


I was so impressed! As always I am skeptical about "wonder tools" and paranoid about purchases over the internet.
The tool saved me hours of labor time and was shipped promptly and without incident. I have done dozens of valve
jobs and this was by far the easiest one.
Sean T. Conroy


I ordered the tool 8 months ago. It was a fantastic tool! Saved me at least a couple of hours work.
Alex Gregory - Product Mgr. NIDS Competitive Analysis
Symantec corporation www.symantec.com

I have to admit using that tool was wonderful. It cut my typical 12 hour job into an easy 8.
Bill H.


The tool worked perfectly on my Toyota 3SGE head and I am very happy I got this tool.
I have actually recommended it to all the folks on www.celica.net.
Steven Weaver Tulsa OK


The tool works great......unbelievable how easy it is to use. I replaced the valve seals
on my Toyota Supra 2JZGE with the head still on the engine.
Mark Messina

It was a fantastic tool. Saved me at least a couple hours work.
Alex Gregory Product manager-NIDS Competitive Analysis
www.symantec.com

I recently used your tool being a little skeptical on how it would work. Sure enough after doing the first
valve spring I realized this tool is complete quality. After inserting the keepers into the retainer first, this product
worked flawlessly. This is the only way to do a valve spring/valve seal change on a Supra 2JZGE.
The product is Easily worth the money. Thanks, Corey


Just a follow up to let you know I received the tools and was able to complete the engine work on my 20 year old Camry.
I was stuck when I called, thanks for helping me out with the fast shipping!
Best Regards, Carl Morris

I received my ValveMaster tools in the mail this morning, and I already have 4 heads stripped.
I've spent a fortune on valve tools in the last few years trying to find something to work on the
Nissan 240SX KA24DE and SR20DET heads, and the valvemaster is the first one that actually worked.
I'll admit that I was skeptical when I ordered it, but now I can't thank you guys enough!
I'm going to finally be able to do valve jobs at a reasonable price with this tool, It's already invaluable.
Thanks again, Ryan Hickey, Owner - Feint Performance

Thank you very much sir! Your service as well as your tool is exceptional! Worked perfectly on my 300ZX.
Still can't believe how easy it was to use. This is by far the best tool I have ever used for removing valves.
Again Thanks, Rodney Plowe Java Center NY

Received the Valve spring compressor and the valve seal pliers. They both worked wonderfully. Real lifesavers.
Thank you, James Beach Roswell GA

Just used the tool to do the valve seals on my 92 Celica 5SFE, incredible! This tool simply kicks butt! Incredible product, my hat off to you!
Lee Ashburn New Bern NC

Just to let you know the tools worked brilliantly my husband and brother-in-law are glad they got them
as it has saved them a lot of time, it was just as your video showed and without them
it would have meant taking her all apart can highly recommend it to anyone
best regards| Eileen United Kingdom

ValveMaster Multi-Groove Tool

I practiced on an old head I had. I had the springs off and back on in no time!!
John Sabol-Virgina Beach VA

The VMTMG tool is amazing and I am so glad I bought it.
BC, Canada

I'm working on a 1.8T, The VMTMG tool worked great and I am already finished
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.